DSEclinical 5197

Never before was a simulation so real

The dental simulation unit KaVo DSEclinical 5197 stands for excellent ergonomics, design and a maximum of flexibility.

DSEclinical-5197

Train your students on simulation units to give them the best possible preparation for working under actual clinical conditions.

  • The numerous positions of the patients simulator ensure the proper ergonomics during treatment, and simultaneously save space.
  • Flexibility in terms of equipment and possible combinations facilitates tailoring to your specific requirements and the spatial conditions inside your surgery.
  • Simple, creative and competent.
  • Experience simulation with realistic adjustment settings as they would be on the dental treatment equipment used under actual clinical conditions.

 

  • In the pre-clinic, students learn with original components of a treatment unit and do not subsequently have to transpose the workflows they learned.
  • KaVo DSEclinical 5197 offers perfect ergonomic prerequisites for any treatment concept.
  • Optimal integration of the 3D navigation system Dentsim/IGI from Image Navigation.

The simulation unit KaVo DSE-clinical 5197 sets new standards with regard to treatment ergonomics and equipment flexibility. With KaVo DSEclinical 5197, students learn right from the start, under more realistic conditions.

Dentist element

Dentist element

The dentist element of the KaVo Primus 1058 may be composed individually and thus fulfills the highest requirements. Five instrument trays may be freely configured. In addition, the extension module allows for the connection of an intraoral camera, for example. Changes may also be made at a later point in time, guaranteeing future flexibility. The dentist element is available both as a TM Table and S Table.

 

Assistant element

 

Assistant element

The standard assistant element offers space for high volume aspirator, saliva ejector aspirator and, as an option, for the second three-function hand-piece as well as LED polymerisation handpiece. Likewise available as an option is the height adjustment for optimal treatment ergonomics (adjustment range: 30 cm). The optional film keypad with one-touch keys constitutes an enhancement of operational comfort for the assistant. This facilitates the control of the following functions: instrument light, treatment light On/Off, switch the motor direction, spray pre-selection and position setting.

_

Flexibility for individual solutions

DSEclinical 5197 patient simulator

Patient simulator

The vertical position of the patient simulator can be adjusted by pressing the chip blower of the foot switch and moving the simulator to the proper height.

  • Min. height up to the incisal edge: 680 mm
  • Max. height up to the incisal edge: 1000 mm

 

Right-and-left-positioning.jpg DSEclinical 5197 right and left positioning

Right-left adjustment

The simulation unit KaVo DSEclinical may be converted from right
hand use to left hand use in just a few seconds and without the
requirement to use any tools.

DSEclinical 5197 double chair

Double chair

Remarkable characteristics of the KaVo DSEclinical 5197 are its high degree of flexibility regarding its equipment and its versatile combination possibilities. This allows for the KaVo DSEclinical to be adjusted to any individual circumstances regarding the availability of space in your clinic. An example of the most commonly installed version of the double-chair version is displayed.

DSEclinical 5197

Combination workplace

The KaVo DSEclinical combination workplace combines a simulation unit with a complete KaVo Primus 1058 treatment unit. If required, both units
may be used as simulation units by installing the patient simulator on the patient chair of the KaVo Primus 1058. For the mutual training of treatment situations, one student may play the role of the patient and be treated by the other student on
the treatment unit.

Foot control

Foot control

The comfortable foot control has a centering function. The ergonomic, right-left swing of the pivot pedal, prevents leg muscles from becoming tired. The foot control facilitates the control of all chair, instrument and multimedia functions

DSEclinical 5197

KaVo DSEclinical with a swivel table

The KaVo DSEclinical 5197 may also be fitted with a swivel table. The swivel table allows for a more ergonomic sitting posture. The well balanced instruments facilitate fatigue-free operation, while collisions are avoided by moving the table out of the way. 5 instrument holders allow a variable instrument configuration.

DSEclinical-5197-TM-Dentsim.jpg DSEclinical 5197 Dentsim Integration

KaVo DSEclinical with Dentsim
integration


As an option, the KaVo DSEclinical 5197 offers the integration of the Dentsim system from Image Navigation. With this computer controlled learning and simulation system, pre-clinic students may practice dental treatment workflows:
• Precise tactile feedback during the preparation of
KaVo simulation teeth.
• Training of various dental treatment procedures with live 3D display and navigation.
• Independent learning.
• Visual traceability of the student’s performance.
• Automatic analysis of the student’s preparations

Technical characteristics

Rated voltage (country-specific)


• 100 V / 50/60 Hz
• 120 V / 50/60 Hz
• 230 V / 50/60 Hz


Mains fuse


• Typ T6,3 H / 250 V
• Maximum permissible mains voltage fluctuations ±10 % of the mains voltage
• Overload category II


Operating mode


• Intermittent operation for motor KL 701, the operation time consists of 2 minutes, the time out consists of 8 minutes
• Intermittent operation for the motor KL 703, the operation time consists of 2 minutes, the time out consists of 8 minutes
• The operation time consists of 25 seconds, the time out consists of 400 seconds

Services


• Water quality drinking water
• Water hardness 1.5 to 2.14 mmol/l _ 8.4° to 12° dH
• pH-value 7.2 to 7.8


Connected loads


• Power consumption about 450 VA in the basic equipment version
• Water pressure ranging from 2 to 6 bar
• Air pressure ranging from 5 to 7 bar
• Maximum water consumption 0.1 l/min
• Maximum air consumption with external suction 60 l/min


Speed


• Dental drives
• Instruments depending on the type up to 300,000 min-1
• KL motor 40,000 min-1

 

 

Overview of the Equipment

Patient chair

standard_kl.gif Symbol optional

Default

standard_kl.gif Symbol optional

   
 Backrest

standard_kl.gif Symbol optional

Comfort

standard_kl.gif Symbol optional

   
 Headrest

standard_kl.gif Symbol optional

Double joint with a rotary knob

standard_kl.gif Symbol optional

   
Dentist element

standard_kl.gif Symbol optional

TM table

muss_kl.gif Symbol Muss

Swivel table

muss_kl.gif Symbol Muss

1. Turbine tubing

optional_kl.gif Symbol optional

1. KL motor connection for KL 701

optional_kl.gif Symbol optional

1. KL motor connection for KL 703

optional_kl.gif Symbol optional

triple function handpiece

standard_kl.gif Symbol optional

Multifunctional handpiece

optional_kl.gif Symbol optional

2. Turbine tubing

optional_kl.gif Symbol optional

2. KL motor connection for KL 701

optional_kl.gif Symbol optional

2. KL motor connection for KL 703

optional_kl.gif Symbol optional

PIEZOlux Ultrasonic scaler kit

optional_kl.gif Symbol optional

PIEZOsoft Ultrasonic Scaler

optional_kl.gif Symbol optional

Tray holder for US tray

optional_kl.gif Symbol optional

Tray 1 standard tray

optional_kl.gif Symbol optional

Tray 2 standard trays

optional_kl.gif Symbol optional

2 standard trays / instrument rack

optional_kl.gif Symbol optional

Non-slip mat

optional_kl.gif Symbol optional

Anti-reflux valve for handpieces

standard_kl.gif Symbol optional

ERGOcam

optional_kl.gif Symbol optional

   
Assistant element

standard_kl.gif Symbol optional

High volume aspirator

standard_kl.gif Symbol optional

Saliva ejector

standard_kl.gif Symbol optional

triple function handpiece

optional_kl.gif Symbol optional

Multifunctional handpiece

optional_kl.gif Symbol optional

Satelec LED curing light

optional_kl.gif Symbol optional

Tray for accommodating a tray

optional_kl.gif Symbol optional

Tray for DIAGNOdent

optional_kl.gif Symbol optional

Swivelling assistant’s element

standard_kl.gif Symbol optional

Swivel and height-adjustable assistant element

optional_kl.gif Symbol optional

Selective support kit

optional_kl.gif Symbol optional

   
Supply system 

standard_kl.gif Symbol optional

Water block, compact

standard_kl.gif Symbol optional

   
Disposal system

standard_kl.gif Symbol optional

External suction

standard_kl.gif Symbol optional

Solids collector kit

standard_kl.gif Symbol optional

   
Other utilities

standard_kl.gif Symbol optional

Foot control

standard_kl.gif Symbol optional

KaVoLUX 540 LED

optional_kl.gif Symbol optional

KaVo MAIA LED

optional_kl.gif Symbol optional

KaVo EDI

optional_kl.gif Symbol optional

Light mounting post

optional_kl.gif Symbol optional

ERGOcom light

optional_kl.gif Symbol optional

Dentsim Integration*

optional_kl.gif Symbol optional

 

  Legende

standard_kl.gif Symbol optional

Standard equipment

optional_kl.gif Symbol optional

Optional equipment

muss_kl.gif Symbol Muss

Must be chosen

*

Only possible in the dentist element TM Table

Downloads
Brochures
Instructions
Statements
Brochures Back
Download (2.23 MB)
Download (2.22 MB)
Instructions Back
Download (4.59 MB)
Download (909.26 KB)
Download (9.93 MB)
Download (10.92 MB)
Statements Back
Download (1.18 MB)
Interested? Get in touch now: