Prophylaxis / special applications

KaVo INTRA heads - Prophylaxis

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

INTRA EVA head L61 R

intra_eva_kopf_l61r.jpg INTRA Heads

  • Precise locking of the dental
    instrument into one of 36 snap-in
    positions (for use with Proxoshape,
    MarginShaper, Bevelshape,
    Cavishape, Rootshape files, as well
    as Ortho Strips from INTENSIV)
  • Damped 0.8-mm lift, for gentle and
    efficient treatment and preparation

     
  • Indications:
  • For perfect removal of excess filling
    material and working restored
    proximal surfaces (with Proxoshape
    files)
  • For quick and controlled, unilateral or
    bilateral interdental exposure,
    enamel reduction and polishing in
    orthodontics (stripping) (with Ortho
    Strips)
  • For bevelling anterior tooth
    composites, composite slots, inlays
    and onlays (with Bevelshape files)
  • For finishing borders of veneer
    preparations (with Bevelshape files)
  • For crown preparations when
    finishing chamfers and bevelling the
    shoulder preparation (with
    Bevelshape files)
  • For removing enamel lamellae and
    for finishing cavity walls; (with
    Cavishape files)
  • For controlled substance removal
    during odontoplasty (with Rootshape
    files)
  • For removing soft dental plaque and
    calculus, as well as excess filling
    material on the root surface (with
    Rootshape files)
  • For quick and easy bevelling, as well
    as preparation and finishing of cavity
    walls using a dental instrument (with
    MarginShaper)
  • Application with sufficient water
    spray (min. 50 ml/min.)
  • Maximum drive speed 20,000 rpm
  • Mat. no. 1.008.1829

 

INTRA EVA head L61 G

intra_eva_kopf_l61g.jpg INTRA Heads

  • Damped 0.8-mm stroke for tissue-
    preserving and pleasant treatment
  • Files can be rotated freely
    (Proxoshape, Bevelshape,
    Cavishape, and Rootshape files
    made by INTENSIV)
  • Interior cooling possible (especially
    for subgingival applications)
  • For indications see L61 R (use of
    ortho-strips with L61 G is restricted,
    MarginShaper cannot be used)
  • Use with sufficient water spray (min.
    50 ml/min.)
  • Maximum drive speed 20,000 rpm
  • Mat. no. 1.008.1828

 

INTRA prophy head L31

intra_prophy_kopf_l31.jpg INTRA Heads

  • Reduction ratio 2:1
  • With thread and knob for snap-on
    and screw-type polishing
    attachments (cups, rubber disks and
    brushes)
  • With multiple sealing to prevent the
    penetration of polishing paste and
    the associated wear as best as
    possible
  • Remove plaque, polish fillings and
    smooth the tooth surface, e.g. after
    powder jet treatment or calculus
    removal
  • Maximum drive speed 15,000 rpm
  • Mat. no. 1.008.1824

 

INTRA endo/prophy head L53

intra_kopf_l53.jpg INTRA Heads

  • Now also for polishing attachments
    with a shaft diameter of 2.35 mm
  • Reciprocating rotary motion of 60°
    prevents the polishing paste from
    being scattered
  • With push-button chuck
  • Remove plaque, polish fillings and
    smooth the tooth surface, e.g. after
    powder jet treatment or calculus
    removal
  • Maximum operating speed 3,000 rpm
    – recommended shank: 29 LP / 2x
    green

instrumentenkonfigurator_en Instrumentenkonfigurator

Do you know our new instruments configurator? No, then test it right here...

Downloads
Brochures
Instructions
Statements
Brochures Back
Download (3.47 MB)
Download (2.96 MB)
Instructions Back
Download (1.77 MB)
Download (1.87 MB)
Download (2.22 MB)
Download (2.22 MB)
Download (233.21 KB)
Statements Back
Interested? Get in touch now: