Micromotors & motor control

Electric and air powered micromotors

Electric powered and air-driven motors from KaVo provide constant-torque over the entire speed range.

With the new KaVo SMARTdrive you immediately obtain more comfort and more power as standard and at no extra cost.

Electrically operated motors

 

INTRA LUX KL703 LED – Maximum performance that eclipses competitors

Impressive power and handling – KaVo INTRA LUX KL703 LED. Thanks to a weight reduction of 30 % and a 25 % smaller design, it offers perfect ergonomics and optimum balance with perfect weight distribution.

 KaVo INTRA LUX KL703 LED - Dental micromotor

  • Integrated brushless micromotor with endo function
  • 25 % shorter and 30 % less weight than the INTRA LUX KL702
  • Integrated 25,000 LUX LED with a long service life
  • Speed range
  • 100 - 40,000 rpm in combination with the SMARTdrive motor control
  • 2,000 - 40,000 rpm with normal motor control
  • SMARTdrive optimised
  • Controllable torque
  • Sterilisable
  • Pre-setting and control through control panel of the dentist element
  • Precise control through foot control
  • Indication-based torque setting
  • No independent endo motor needed

 INTRA LUX KL701 - micromotor

KaVo INTRA LUX KL701 - Dental micromotor

  • 3 year guarantee
  • Micromotor - 8.4 mm shorter than its predecessor
  • Brushless and therefore hardwearing
  • Up to 40,000 revolutions per minute
  • KaVo suck-back stop to prevent sucking back of contaminated spray water
  • Better handling through elastically rotatable tubing
  • Lighter than 100 grams
  • Very quiet thanks to minimum cooling air requirement
  • Replaceable ball bearings
  • Patented winding

INTRAmatic LUX K200

KaVo INTRAmatic K200 - Dental micromotor
K200 (successor to K196)

  • 2 year warranty
  • One of the smallest and most reliable motors on the dental market
  • Up to 40,000 revolutions per minute
  • Integrated non-return valve:
    Prevents recontamination of the spray water system with
    micro-organisms
  • Flexible, elastic and easily rotatable. The newly developed tubing maximizes the handling and facilitates your work.
  • New lubricant filter: The special protective barrier against contamination. All cleaning and care agents are trapped so that they do not reach the inside of the motor.
  • Increased life cycle
  • Mat.-Nr. K200: 1.000.6717
_

 

Air-operated motors

INTRAmatic L-Motor 181 L

KaVo INTRAmatic L181L - Dental micromotor

  • Speed range: 5,000 - 20,000 rpm
  • 4-hole LUX connection
  • INTRAmatic coolart system
  • Mat.-Nr. 0.535.5210

INTRAmatic L-Motor 181 H

KaVo INTRAmatic L181H - Dental micromotor

  • Speed range: 5,000 - 20,000 rpm
  • 4-hole standard connection
  • INTRAmatic 2 coolart system
  • Mat.-Nr. 0.535.5200

INTRAmatic L-Motor 181 CB

KaVo INTRAmatic L181CB - Dental micromotor

  • Speed range: 5,000 - 20,000 rpm
  • Various tubing connections available
  • 4-hole standard connection
  • INTRAmatic 1 and 2 coolart system
  • Mat.-Nr. 0.535.5050

INTRAmatic L-Motor 181 DB

KaVo INTRAmatic L181DB - Dental micromotor

  • Speed range: 5,000 - 20,000 rpm
  • Borden 2-hole connection
  • INTRAmatic 1 coolart system
  • Mat.-Nr. 0.535.5060

INTRA MULTIflex L-Motor 181 M

KaVo INTRA L181 M - Dental micromotor

  • Speed range: 5,000 - 20,000 rpm
  • For connection to MULTIflex couplings
  • INTRAmatic 2 coolart system
  • Mat.-Nr. 0.535.5250
_

 

Surgery motors

Surgery motor INTRA LUX S600 LED

Surgery motor INTRA LUX S600 LED - Electric driven motors

 

  • 28 % lighter and 20 % shorter*
  • 80 Ncm torque at the instrument
  • SMARTdrive technology for high torque and minimum vibration at the start
  • Max torque 5.5 Ncm (0 -12,000 U / min) / 5.5 to 2.5 Ncm between 12,000 - 40,000 rpm
  • Speed range: 0 – 40,000 rpm
  • Brushless DC motor with KaVo Mini LED
  • Thermodisinfectable and sterilizable
  • Mat.-Nr. 1.008.8000

Surgery motor INTRA-LUX SL 550

Surgery motor INTRA LUX SL550 - Electric driven motors

  • Motor control: INTRAsurg 300 plus, INTRAsurg 1000, INTRAsurg 1000 Air, treatment unit with electronic
  • Speed range: min. 300 rpm / max. 40,000 rpm
  • Torque control: max. 5.5 Ncm
  • Light: 25,000 Lux
  • Mat.-Nr. 1.001.3421

 

 

Motor control SMARTdrive with INFORM TECHNOLOGY

Thanks to the pilot drive, the torque is much higher even in the low speed range.

Take the touch test

Experience the SmartDrive INFORM TECHNOLOGY WHICH generation in motor control :

  • Increased torque

  • Improved startup characteristics

  • Wider speed range

  • Extended area of application

_

smartdrive-e30.jpg E30

High torque for all dental procedures

Thanks to the new pilot drive, the torque is much higher even in the low speed range. This supports safe and precise operation, which in turn reduces treatment times.

Vibration-free, smooth startup characteristics

KaVo SMARTdrive offers especially vibration-free startup characteristics in the low speed range from as little as only 100 revolutions per minute.
This enables especially quiet, controlled running for steadier and more efficient work.

Motor characteristic Standard: perceptible and audible jerking
SMARTdrive INFORM TECHNOLOGY: Vibration-free, smooth startup characteristics

More comfort and power

With the new KaVo SMARTdrive you immediately obtain more comfort and more power as standard and at no extra cost.
With the KaVo Treatment Centres, ESTETICA E80, E70, E50, E30 and PRIMUS 1058, the new generation of motor control, KaVo SMARTdrive, now comes as standard.
KaVo offers you a real innovation that you will appreciate.

_

smartdrive-behandlung.jpg

A wide range of speeds increases the area of application for the dentist

KaVo SMARTdrive now offers you a wider speed range – this extends from just 100 to 40,000 revolutions per minute, compared with the previous 2,000 to 40,000 revolutions per minute. In general, all straight and contra-angle handpieces are more versatile, due to the wider speed range, which results in an extension of the area of application per handpiece.

Experience just how gentle power can be. Take the touch test.

Downloads
Brochures
Instructions
Statements
Recycling
Brochures Back
Download (217.34 KB)
Download (3.66 MB)
Instructions Back
Download (2.51 MB)
Download (4.37 MB)
Download (3.66 MB)
Download (5.42 MB)
Download (3.88 MB)
Download (3.7 MB)
Download (3.69 MB)
Download (4.35 MB)
Download (4.34 MB)
Download (1.84 MB)
Download (2.04 MB)
Download (1.79 MB)
Download (3.59 MB)
Download (1.79 MB)
Download (1.79 MB)
Download (2.47 MB)
Download (2.49 MB)
Download (2.04 MB)
Download (1.79 MB)
Download (2.49 MB)
Download (3.59 MB)
Download (1.79 MB)
Download (2.47 MB)
Download (2.51 MB)
Download (2.51 MB)
Download (1.84 MB)
Download (2.51 MB)
Statements Back
Download (663.09 KB)
Download (662.16 KB)
Download (1.12 MB)
Download (1.07 MB)
Download (655.65 KB)
Download (655.65 KB)
Download (296.63 KB)
Download (655.65 KB)
Download (1.19 MB)
Download (1.18 MB)
Download (663.09 KB)
Download (177.02 KB)
Download (459.54 KB)
Recycling Back
Download (2.26 MB)
Download (4.41 MB)
Download (2.43 MB)
Download (4.41 MB)
Interested? Get in touch now: