ELECTROmatic System

Air to electric motor conversion kit for treatment units.

Switching to KaVo electrics helps you to improve your efficiency, provide better patient care, and increase your confidence in handling complicated cases. KaVo will get you there, with the reliability of more than 35 years experience in electrics. 
Easy speed and power control – Easy to use – Easy versatility – Easy and fast installation.

KaVo ELECTROmatic - Dental electric motors

ELECTROmatic - Highest power and constant speed at high load.

The entry into the world of KaVo ELECTROmatic. This simple system allows speed control with the foot control, just as an air-driven high-speed. The KaVo portfolio of speed increasing and decreasing handpieces offers additional control and flexibility with the system.


KaVo ELECTROmatic - Dental electric motors

Highlights & Advantages

  • KL703 LED Motor (100 -  40,000 rpm) or
    COMFORTdrive option (20,000 - 200,000 rpm) 
  • Perfect balance - light weight
  • LED light (25,000 LUX)
  • Spray water regulation on motor tube
  • Auto-calibration (air pressure)
  • Flexible mounting options


KaVo ELECTROmatic Plus - Dental electric motors

ELECTROmatic Plus - The perfect solution for all high- and low-speed applications.

Perfect control and programmable speed settings allow the stable running of the bur. The colour LCD Display shows the actual motorspeed and the three speed programs are easy to set-up. This allows a fast set-up for all high-speed and low-speed applications.


KaVo ELECTROmatic Plus - Dental electric motors

Additional Highlights & Advantages*

  • 3 Speed presets
  • LCD-Colour screen and touch buttons
  • Right/left rotation

* additional to ELECTROmatic


KaVo ELECTROmatic Premium - Dental electric motors

ELECTROmatic Premium / ELECTROmatic Premium Dual 

The ultimate all-in-one device with a 4.3" TFT colour touch screen for intuitive handling and integrated endo function. Available with one or even two motors for perfect workflow efficiency: preset your desired handpieces, select the desired speeds and you can easily switch between high- and low-speed handpieces or your selected endo program.



Additional Highlights & Advantages**

  • All-in-one with a prep and endo mode
  • 5 speed programs in prep mode
  • Vivid colour touch display for intuitive set-up
  • Endo workflows with each up to 10 files
  • Preset Endo file systems
  • Dual motor option

** additional to ELECTROmatic & ELECTROmatic Plus


ELECTROmatic - Dental electric motors

ELECTROmatic integration

As easy to install as to work with.

The ELECTROmatic versions can be installed in many positions to reach the highest flexibility and perfect ergonomics for the dentist. All necessary fixtures allow assembly under, beside, on top of, behind the tray or onto a wall or cabinet. The display can easily be installed remotely with the integrated cord. The control box can be hidden under the tray when installed.



Top, side, under and behind Tray-Assembly with remote option.



Fast and easy set-up and installation.

Mount the ELECTROmatic, connect the turbine tube and the motor tube to the motor and then connect the transformer to mains. With the first push of the foot pedal of the treatment unit, the system will automatically set-up to the existing air pressure. The system is available with a long tube for rear delivery set-up of the controller, e.g. onto a cabinet as an option.


KaVo ELECTROmatic - Easy to use endo functionality.

The endo mode allows up to 5 individual endo workflows, with up to 10 files each. The system offers a database including over 20 endo file systems all with preset parameters like diameter, taper and ISO colour code. Intuitively program your choice of single files from different systems to individualise your workflows and to implement further files.


ELECTROmatic - Prep mode

Prep mode.

Within the prep mode it is very easy to change settings:

  • 5 programmable speed settings
  • Selectable gear ratio of handpiece — shows actual bur speed
  • Motor forward / reverse



ELECTROmatic - Endo Workflow

Endo workflow setup.

Define up to five individual endo workflows. For each workflow choose between one of the predefined endo steps E0-E9. Choose the preferred file system and desired diameter / taper — the system automatically shows the max. speed and torque for the selected ISO file. Define each of the 5 workflows with your desired description.



ELECTROmatic - Endo Workflow

Work easily in your endo workflow.

On the touch display, select one of your five endo workflows. Start with endo step E0 and continue as preset. The display shows the file name with ISO colour code, taper and diameter. If necessary, change the desired speed and torque with the active slider.

  • Water is automatically blocked in endo mode
  • Gear ratio options 1:1, 3:1 and 8:1
  • Choose in ENDO-Mode between torque control, auto reverse, auto reverse / forward and motor forward / reverse

Technical Specifications



ELECTROmatic Plus

ELECTROmatic Premium

ELECTROmatic Premium Dual



LCD colour display 4.3“ colour touch display 4.3“ colour touch display

Dimensions (mm)

143 x 118 x 36

145 x 132 x 44

150 x 135 x 76

150 x 135 x 76



3 speed presets

5 preset in prep mode
5 endo workflows with up to 10 files and 22 file systems for fast set-up speed slider

5 preset in prep mode
5 endo workflows with up to 10 files and 22 file systems for fast set-up speed slider

Drive included

1 x KL703 or
1 x COMFORTbase

1 x KL703 or
1 x COMFORTbase

1 x KL703

2 x KL703 or 1 x KL703
+ 1 x COMFORTbase

Media input

via 4/5/6 hole standard connection System pressure: 1.8 - 5 bar,
Spray air: 1.0 - 2.5 bar,
Spray water: 0.8 - 2.0 bar

Water filter


Power supply

4.5 m connection cable

Remote cord length


800 mm 800 mm 800 mm


Order numbers



ELECTROmatic Plus

ELECTROmatic Premium

ELECTROmatic Premium Dual

with KL703 motor standard tube (1750 mm) long tube (2200 mm)





with COMFORTbase standard tube (1750 mm) long tube (2200 mm)






KL 703




Max. 3.0 Ncm


Max. 0.4 Ncm

LED bulb intensity

25,000 LUX


25,000 LUX

Motor speed range

100 - 40,000 rpm   20,000 - 200,000 rpm*

* in combination with COMFORTdrive handpiece 

Try our ELECTROmatic touchscreen for yourself

Note: Please click on the PREP-Button to switch from Endo to Prep

It is that easy, just click on the interactive display and try the touchscreen for yourself (on the left hand side):

  • Special prep and endo mode (several torque controls)
  • 5 speed programs in prep mode with display of speed set, very easy to adjust with the slider
  • 5 workflow programs in endo mode with 10 files each
  • 20 pre-programmed file systems to set up max. torque and speed for each file automatically

Short introduction into the KaVo ELECTROmatic System

Instructions for use
Brochures Back
Download (1.85 MB)
Instructions for use Back
Download (9.16 MB)
Download (1.08 MB)
Download (7.24 MB)
Download (711.42 KB)
Interested? Get in touch now: