EXPERTsurg™

Small Devices

Put yourself in the precision to relax

The KaVo EXPERTsurg LUX is designed to make sure you and your patients are always on the safe side.

EXPERTsurg Small Devices

KaVo EXPERTsurg LUX - surgical unit

  • Operate safely with high precision thanks to one of the world’s lightest and smallest surgical motor and auto-calibration
  • Rely on high performance with 80 Ncm torque at the instrument 
  • Save time with intuitive programming and easy hygiene

 

High reliability, top performance

  • 80 Ncm torque at the instrument
  • SMARTdrive technology for high torque and minimum vibration at the start

 

Guaranteed precision, maximum safety

  • One touch auto calibration guarantees precise speed and torque for maximum safety
  • One of the world’s lightest and smallest surgical micro motors
  • Smooth running, low vibration

 

KaVo EXPERTsurg - The surgical unit with high precision.

 

EXPERTsurg Small Devices

Large colour display – 4.3 inch (11 cm)

  • Adjustable display brightness
  • Intuitive operation
  • Large viewing angle
  • Horizontal ca. ± 70°
  • Vertical ca. ± 60°

With the surgical device EXPERTsurg you have everything in sight.

 

KaVo EXPERTsurg LUX

Easy to use functions, saves time

  • Intuitive, straightforward programming
  • Symbolic references and colour display make it simple to operate
  • Easy to clean

The surgical unit EXPERTsurg for less work.

 

KaVo EXPERTsurg wins German Design Award 2015

We are proud to announce that our surgical unit KaVo EXPERTsurg has won the German Design Award Special Mention 2015 in the category “Excellent Product Design – Industry, Materials and Health Care”. 

The German Design Award is an international premium prize which is awarded annually by the German Design Council. Top-class products, their manufacturers and designers, who pave the way forward in the German and international design landscape, are awarded the prizes. 

This award distinguishes work exhibiting design with especially successful partial aspects and solutions – an award honouring the commitment of companies and designers.

EXPERTsurg Small DevicesEXPERTsurg Certificate

 

 

One touch auto-calibration

  • Ensures accurate torque
  • Automatic process

 

 

 

Intuitive user interface

  • Symbolic references and colour display 
  • Accurate display of adjusted max. torque and motor speed

 

 

 

Hygienic design

  • Smooth surface, easy to clean
  • Thermodisinfectable and sterilisable motor and motor tube

 

 

 

And the tekom Dokupreis 2014 goes to KaVo

The tekom Dokupreis 2014 was awarded to KaVo for the EXPERTsurg LUX surgical unit instructions for use. 

The renowned Dokupreis is awarded annually by tekom (Professional Association for Technical Communication and Information Development), the major professional association of technical editors, to instructions for use that are amongst the best in the German-speaking countries. 

The instructions for use of the EXPERTsurg made by KaVo persuaded the jury across the board and received an excellent score. It is important for the safety of patients and users alike, especially in the field of dental surgery, that the use of the equipment is easily comprehensible and intuitive. 

The new KaVo EXPERTsurg LUX surgical unit impresses not only in daily surgical use, but also due to its award-winning instructions for use. 

Six customisable parameters

  • Treatment steps (max. 10)
  • Change of contra-angle transmission ratio 
  • Max speed
  • Max torque 
  • Pumping power (0 – 4) 
  • Motor Forward/Reverse

Technical specifications

  • Power supply voltage: 100 V – 240 V AC 
  • Input frequency: 50 / 60 Hz 
  • Pump performance: 0 – 110 ml / min

KaVo EXPERTsurg - Surgery system featuring high precision.

 

 

Surgical unit EXPERTsurg - Put yourself in the precision to relax

 
Item Description Mat. No.
EXPERTsurg LUX surgical unit All in one Surgical unit including: Surgical motor INTRA LUX S600 LED, Multifunctional foot control (cable length 2.5 m), Motor tubing for S600 LED, Starter tube set (5 pieces), Motor and instrument holder, Irrigation bracket, Integrated peristaltic pump, and Power supply 1.008.3500
INTRA LUX S600 LED One of the smallest and shortest surgical motor (28 % lighter and 20 % shorter compared to its predecessor): Thermodesinfectable and autoclavable, speed range: 0 – 40,000 rpm / min Max torque: 5.5 Ncm (0 -12 000 U / min)/ 5.5 – 1.5 Ncm (12,000-40,000 U / min), Brushless DC motor with KaVo LUX LED 1.008.8000
Sterile Irrigation Tubing S600 External Irrigation tubing for single use (10 pcs) 1.009.8757
Motor Cable S600 Flexible Tubing, Thermodesinfectable and autoclavable, Cable Length 2 m 1.009.1700
Handpiece tray Holder for Motor plus Instrument, Thermodesinfectable and autoclavable 1.009.3411
SURGmatic S201 L

SURGmatic LUX Contra-Angle with transmission 20:1 and light for implant procedures

1.009.0470
SURGmatic S201 C SURGmatic Contra-Angle with transmission 20:1 and without light for implant procedures 1.009.1100
SURGmatic S11 L SURGmatic LUX Contra-Angle with transmission 1:1 and with light 1.009.1010
SURGmatic S11 C SURGmatic Contra-Angle with transmission 1:1 and without light 1.009.1005
SURGmatic S201 XL SURGmatic Hexagon-Contra-Angle with transmission 20:1 and light 1.010.2332
SURGmatic S201 XC

SURGmatic Hexagon-Contra-Angle with transmission 20:1 and without light

1.010.2333

EXPERTsurg Small Devices

Install the free software update easily and conveniently on your EXPERTsurg and benefit from the following changes:

New rinsing function

The "rinsing function" is a new activity you can use on your EXPERTsurg. The rinsing function serves to feed coolant and to start-up the illumination on the handpiece. The motor is not activated during this process in order to protect the patient. The illumination is switched on along with this function. The supplied quantity can be controlled in stepless manner using the speed button on the foot control. To optimise the workflow of treatment, the rinsing function can be programmes as a separate work step just like any other activity. However, the function can also be activated manually by pressing the pump button on the foot control for a longer period of time.

 

Change of transmission ratios that can be set

The transmission ratio of 1:5 for high-speed handpieces has been replaced by a reduction ratio of 16:1. This setting is designed mainly for the common combination of the following KaVo products: INTRA surgery shank 3624 N (0.534.5660) and INTRA reducing head 67 RIC (0.540.8340). Since this contra-angle handpiece is well-suited for inserting transplants as well, it can be used in one-touch calibration.

 

EXPERTsurg Small Devices

Change of the torque profile

The torque curve has been optimised to allow an even higher torque to be reached at high speeds. Accordingly, a torque of 2.5 Ncm at 40,000 rpm is now available to the user.

The present software update applies to devices up to production date 17 Nov. 2014, whereas devices manufactured after this date include this update already.

EXPERTsurg Small DevicesGuidance for Software-Update

Software-Update downloaden...

 

Dr. Omoi

Omori Dental Office
Director: Yuki Omoi

 

Read the report on the KaVo EXPERTsurg surgical unit...

Dr. Tonozuka

Tonotsuka Dental Clinic Perio-Implant Center
Director, Ryohei Tonotsuka

 

Read the report on the KaVo EXPERTsurg surgical unit ...

 

Werner-Hillebrand

Hans-Peter-Billian

Dr. med. Werner Hillebrand
Dr. Dr. med. Hans-Peter Billian
Specialists in Oro-Maxillo-Facial Surgery

 

Read the report on the KaVo EXPERTsurg surgical unit...

Severin-Holl

Dental practice
Dr. med. Severin Holl

 

Read the report on the KaVo EXPERTsurg surgical unit ...

Videos

EXPERTsurg start up and Auto-Calibration

FAQs

Who is able to carry out the repeated inspection (technical safety check / TSC) and when?
  • This check may only be carried out by an electrician who has received appropriate training for the medical product by KaVo.
  • This check is required by law and has to be conducted for the EXPERTsurg and MASTERsurg every two years.
  • The contents and given tests are based on the international standard IEC 62353. This standard applies worldwide for tests of medical electric devices or medical electric systems based on IEC 60601-1.
Who is able to conduct the KaVo service check and when?
  • The service check is conducted directly by the regional KaVo Service Organization. (Please contact the regional KaVo Service Center listed on the service Flyer shipped with the product)
  • The service check of the EXPERTsurg and MASTERsurg should be conducted every 2 years according to the technical instruction.  
  • Content of the KaVo service check:
    • Check of the functionality
    • Update of the software
    • Calibration and check of the performance
    • Repeated inspection (TSC)

    Thus the dentist is always on the safe side at a fair fixed price.

What does the Service Check Icon at the Display mean?

EXPERTsurg requires every 2 years a service check:

  Even if the last date (red wrench) is exceeded, the device works without limitations!

Are loaner units for bridging time of repairs or device checking available?
  • Yes. – If required KaVo is offering a loaner units to bridge time a device has been sent in for repair or service check.
  • Please contact the regional KaVo Service Organization listed on the Service Flyer shipped with the product.
Which warranty offers KaVo for the EXPERTsurg and MASTERsurg and the SURGmatic instruments?
  • KaVo offers a warranty of one year.
How to conduct a software update?
  • Download the software from KaVo Homepage.
  • Save the Software on a SD card (1-32 GB in FAT)
  • Turn off the device
  • Insert the SD card with the new firmware file into the unit. Make sure that only a single firmware file with the .bin file extension (the downloaded current file) is stor‐ ed on the SD card.
  • Turn on the device
    • Update will be started automatically.
  • After the update the device is ready with the new software
  • Info: After the update the filename of the software file is renamed from .bin to .old
     
Which instruments can be checked with the One Touch Calibration?
  • All instruments of the SURGmatic S201 line as well as INTRA LUX contra-angles with a reduction ratio of 27:1 (CL3-09; C9/C3) and 16:1 (3624 N und 67 RIC) can be checked.
One Touch Auto calibration

One-Touch-Calibration

Can the SURGmatic instruments be reprocessed according to RKI requirements?
  • KaVo SURGmatic instruments fulfill the strict German RKI-requirements through a proven reprocessing.
  • The effectiveness of the procedure (see user manual) is approved by tests of an accredited hygiene institute.
  • The instruments should be reprocessed in assembled condition, as it corresponds to the validated reprocessing process (see user manual).
  • The instrument can be disassembled in head and shank for manual non-fixing* pre-cleaning . *non fixing: no alcohols, no aldehydes
Are the new SURGmatic instruments compatible with the INTRAsurg surgery devices or devices of other manufacturers?
  • Yes. But the function for the automatic detection of the instrument can not be used on the KaVo INTRASurg 300+.
Are the previous KaVo surgery instruments compatible with the new Surgery devices?
  • Yes. If the instruments have the following transmissions: 1:1 / 16:1 / 20:1 / 27:1
Are the heads of the INTRAsurg line (e.g. CL 3, C 3 and 67 RIC) compatible with the new SURGmatic S201 shanks?
  • No, see table with examples

Are the heads of the new SURGmatic S201 line compatible with the INTRAsurg shanks (CL 04, CL09, 3620N, etc.)?
  • No, see table with examples

Why are the heads not sold separately?
  • Offering complete instruments to the user facilitates choosing the right product. This prevents complex training in different, mostly special possible combinations.
  • The chirurgical contra angle S201 series covers all relevant speed and torque ranges. Changing heads is not necessary anymore.
  • Of course all heads are available as spare parts.

Are the heads with HEXAGON clamping system compatible to shanks S201 L or S201 C (contra-angles without HEXAGON)?

  • No, because for this combination no validation concerning function and reprocessing exists.
     
Are my previous drills and inserting tools without HEXAGON shanks compatible with the HEXAGON clamping system?
  • Yes. But the advantages of the optimized torque transmission and durability of instruments and tools cannot be used

.

Which maximum torque can be reached at the tool?
  • The devices including the motor INTRA LUX S600 LED generate a torque up to 80 Ncm at the instrument.
  • As the SURGmatic contra-angles are only approved to a maximum torque of 55 Ncm, torques over 55 Ncm should be avoided with these instruments.
  • Torques over 55 Ncm are clinically irrelevant and therefore rarely used.
What is the weight of instruments?
  • The weight of the S201 instrument is without bur or external spray clip only 81 g.
  • Therefore they are comparable with the proven KaVo instruments CL03-09 etc.
Is the motor tested and released for the prion program (sterilization with 18 minutes holding time)?
  • Number of reprocessing cycles far exceed the standard requirement - even when using the challenging prion program.
What happens if there‘s an error display during the motor calibration/checking of instruments?
  • If an error is displayed, the user should first do a calibration process without instrument. If there‘s no further error displayed the instrument is worn.
    • use another instrument.
  • If there is also without the instrument an error displayed, the motor is the reason. The case that a magnet got stronger and therefore produces a higher torque is physical not possible. If the magnet becomes weaker the torque goes down.
What has to be considered during the change of the Mini LED of the motor?
  • Proceed as follows:
    • Separate motor from cable
    • Remove ring by twisting
    • Push out the old LED with a tweezers
    • Insert the new LED in the slot, with the KaVo logo pointing outward
    • Attach the ring by twisting
    • Test the LED by starting the motor
  • There have to be no special measures concerning electrostatic discharge.
     
What can be adjusted at the foot control with the blue closure head?
  • EXPERTsurg: The slot under the lid has no function
  • MASTERsurg: The slot contains the batteries (Alkaline AA)
  • In general: The lid must be closed during the cleaning in order to prevent the penetration of water.
How long lasts the battery in the foot control of MASTERsurg?
  • It depends how often you use the device. But normally over 3 months.
  • After some minutes the foot control changes in a sleep mode to save energy. Activation by pressing of the foot pedal. 
  • Before battery is empty a warning message appears.
    • Once after turning on the device: You should prepare new batteries.
    • Repeated after 10 minutes: You have to change the battery now.
Saving / recording of data?
  • EXPERTsurg:

    • Saving / recording of data / parameters during a treatment is not provided. 
    • Exception: maximum reached torque is displayed until the motor starts again. This can be manually documented.
    • The SD-card slot is only used for software updates. 
  • MASTERsurg: 

    • Recording of the data while inserting the implant is possible as well as a continuous recording of all device data
    • A .bmp and .csv file is stored on the SD card
       
The torque graph at the display doesn’t appear. What is wrong?
  • Is the documentation mode turned on in the device settings? Implant must be activated.
  • The program step / activity “Inserting implant” must be activated.
  • The graph only appears if there is a torque at the instrument.  
     
What is documented within the .bmp file?

FAQ MATERsurg/EXPERTsurg

When is the .bmp and .csv file stored?
  • After 60 Seconds if there is no further activity
  • After changing the Program step
  • After changing the implant position
Which adjustments are possible?

FAQ MATERsurg/EXPERTsurgv

  Values can ONLY be edited within the predefined range of the dedicated icons!

Which parts of the tubing can be sterilized and which cannot?
  • The complete tubing for the irrigation medium is just for single use and must be thrown away after every patient. This leads to higher patient safety, longer lifetime and better flexibility of the motor tube.
  • The motor tube as well as the motor can be thermally disinfected and sterilized.
Disinfection of housing surface
  • All device surfaces can be disinfected with wipe disinfection. Material test and approval was carried out with following medium:
    • FD 322 Dürr
    • Microcide AF Liquid (Schülke & Mayr)
       
Is it possible to use the device in potentially explosive atmospheres?
  • No, the device must not be used in potentially explosive atmospheres.
  • Furthermore the device must not be used in oxygen enriched areas (see instruction of use).
     
Will there be devices e.g. for workshops available?
  • As in the past, there will be demo units as exhibits for training courses available.
  • For reservations contact Mrs. Purtseladze: Natalia.Purtseladze@kavo.com (link sends e-mail), Tel. +49 7351 – 56 1900
  • Except of demo units for exhibitions. These have to be ordered as usual.
     
General Trouble Shooting

Pump symbol shows yellow background 

FAQ MATERsurg/EXPERTsurg

Spray-hose is not connected

FAQ MATERsurg/EXPERTsurg

Display does not match with reality

FAQ MATERsurg/EXPERTsurg

Pre-selected tranission is wrong

FAQ MATERsurg/EXPERTsurg

Motor symbol shows yellow background

FAQ MATERsurg/EXPERTsurg

Motor is not connected, defect motor  tube or motor

FAQ MATERsurg/EXPERTsurg

Auto calibration fails

FAQ MATERsurg/EXPERTsurg

Defect contra-angles or motor

FAQ MATERsurg/EXPERTsurg

„I can‘t preselect my request speed.“

FAQ MATERsurg/EXPERTsurg

Limitation by pre-selected icon

FAQ MATERsurg/EXPERTsurg

„Warning E 42 or E 47 Hardware failure“

FAQ MATERsurg/EXPERTsurg

Moisture inside the plug of the motor hose

FAQ MATERsurg/EXPERTsurg

 

Non-functional device

  • The unit is switched off.

    • Switch-on the mains switch on the rear of the unit.

  • Neither end of the power cable is plugged in.

    • Plug in the power input cable.

  • Unknown

    • Turn the unit off and on.

  • Blown fuse

    • Contact customer service.

 

No coolant in the hand‐piece. 

  • The coolant flow pre-selec‐ted. Pump is off.

    • Pre-select coolant flow.

  • Hose fixation is not plug‐ged in.

    • Plug in the hose fixation.

  • Bottle is empty.

    • Connect new bottle.

  • Hose clamp is closed.

    • Open the hose clamp.

  • Pump locking mechanism is not closed.

    • Check and close, if needed, the closing mechanism

  • Hose is kinked.

    • Check hose and remove the kink, if any.

  • Glass bottle containing the coolant is not ventilated.

    • Open the cap on the ventilation valve of the puncture needle.

 

Insufficient coolant flow in the instrument

  • Spray nozzles are crusty or soiled.
    • Clean the spray nozzles with the nozzle needle or reprocess the part.
  • Glass bottle containing the coolant is not ventilated
    • Open the cap on the ventilation valve of the puncture needle.
       

The motor makes a grinding noise or does not run smoothly

  • The motor is not correctly plugged on or screwed on.
    • Firmly insert the motor hose into the housing.
    • Firmly screw on the motor hose to the motor.
    • Check if all the connections and couplings are firmly seated.
       

No light on the straight or contra-angle handpiece

  • The light is not turned on.
    • Turn on the light.
  • The straight and contra-angle handpiece is improperly attached.
    • Attach the straight and contra-angle handpiece until     the catch audibly locks.
  • Defective LED.
    • Replace the LED.
  • Not a suitable straight and contra-angle handpiece.
    • Use a suitable light, straight and contra-angle handpiece.
       

Error messages from software

 

Event E3: Release the foot pedal

  • Foot control was activated while the unit started up.
    • Release the foot control.
       

Event E4: Data initialisation

  • Setting data newly initialised
    • Confirm message and check or correct the program settings. If the problem persists, notify service engineer
       

Event E6: Internal communication error

  • Internal system error.
    • Turn the unit off and on. If the problem persists, notify service engineer.
       

Event E9: Setting the time and date

  • Time was not reset after re-start.
    • Setting the date and time.
    • If the problem persists, have a service engineer replace the battery of the real-time clock.
       

Event E29: SD card write protection

  • SD memory card is write-protected or defective.
    • Switch the write-protect switch on the left side of the card upwards to "unlock", "write" or the like.
    • If the problem persists, use a new SD memory card.
    • If the problem persists, notify service engineer.
       

All events >30: Hardware error

  • Internal system error.
    • Turn the unit off and on. If the problem persists, notify service engineer.
       

Events E36 and E37: Motor overload

  • Overtemperature on stator. Over-current > nominal current.
    • Let the motor rest. If the problem persists, notify service engineer.
       

Event E47

  • Residual moisture in the plug of the motor cable can lead to false recognition of an E47 error during the start-up test of the device.
    • Turn the device off.
    • Disconnect the motor cable from the device.
    • Turn the device on.
    • Connect the motor cable.
    • Make sure that water cable and motor plug are absolutely dry.
    • Do not drive with compressed air as this may drive liquid into the plug.
    • If the problem persists, notify service engineer.

Foot control symbol has a yellow background

  • Foot control malfunction.
    • Check if the foot control plug is plugged in.
    • Check if the foot control is installed correctly.
    • If the problem persists, notify service engineer.
       

Motor symbol has a yellow background

  • No motor attached.
    • Connect the motor.
       

Pump symbol has a yellow background

  • Hose fixation is not plugged in.
    • Plug in the coolant hose.
       

One-touch calibration failed

  • Straight or contra-angle handpiece is too sluggish.
    • Perform a run in the absence of the straight or contra-angle handpiece.
    • If no error message is displayed, the handpiece runs too sluggish.
    • Use a different straight or contra-angle handpiece.
  • If the run in the absence of the straight or contra-angle handpiece again produces an error message, the motor torque is too low.
    • Use a different motor; possibly return the motor for repair.
       

Service symbol is green

  • Service is due soon.
    • Arrange a precautionary appointment at a KaVo subsidiary or with a KaVo authorised dealer.
       

Service symbol is yellow

  • Service period is expired.
    • Arrange an appointment at a KaVo subsidiary or with a KaVo authorised dealer.
       

Service symbol is red

  • Service overdue: > 4 months
    • Arrange an appointment immediately at a KaVo subsidiary or with a KaVo authorised dealer.
       

Error message "SD card defective" during software update

  • SD card is formatted incorrectly or SD card is defective.
    • Format SD card in FAT16 or FAT32 format or use new CD card. Then repeat the updating process.

Downloads

Type

Language

Sort by

Elements per page

Displaying 1 - 10 of 152
Expertsurg Sell Sheet
Document Type: Product Brochure
Language: French
Version: 
01
Release date: 
Thursday, 10 April, 2014 - 07:04
File size: 
0.78 mb
Expertsurg Sell Sheet
Document Type: Product Brochure
Language: Polish
Version: 
01
Release date: 
Wednesday, 12 March, 2014 - 06:03
File size: 
0.78 mb
EXPERTsurg
Document Type: Product Brochure
Language: English (UK)
Version: 
01
Release date: 
Tuesday, 28 January, 2014 - 07:01
File size: 
0.77 mb
EXPERTsurg
Document Type: Product Brochure
Language: Portuguese (Portugal)
Version: 
01
Release date: 
Wednesday, 22 January, 2014 - 07:01
File size: 
0.78 mb
EXPERTsurg
Document Type: Product Brochure
Language: Italian
Version: 
01
Release date: 
Wednesday, 22 January, 2014 - 07:01
File size: 
0.78 mb
EXPERTsurg
Document Type: Product Brochure
Language: Spanish
Version: 
01
Release date: 
Wednesday, 22 January, 2014 - 07:01
File size: 
0.78 mb
EXPERTsurg SellSheet
Document Type: Product Brochure
Language: German
Release date: 
Wednesday, 28 January, 2015 - 07:01
File size: 
1.64 mb
EXPERTsurg
Document Type: Product Brochure
Language: English (UK)
Release date: 
Wednesday, 28 January, 2015 - 07:01
File size: 
1.63 mb
EXPERTsurg
Document Type: Product Brochure
Language: Italian
Release date: 
Wednesday, 28 January, 2015 - 07:01
File size: 
1.69 mb
EXPERTsurg
Document Type: Product Brochure
Language: Polish
Release date: 
Wednesday, 28 January, 2015 - 07:01
File size: 
1.64 mb