INTRA™ LUX heads

Dental handpieces and contra-angles

For unlimited versatility

KaVo INTRA Head - The only configurable contra-angle handpieces composed of INTRA head and MASTERmatic LUX. Versatile, economical, unique.

INTRA LUX heads Dental handpieces and contra-angles

KaVo INTRA heads

65 % harder than before and twice as resistant to deformation than titanium. These are the new KaVo INTRA heads – the best and most durable ones ever

  • Durable – thanks to the use of special state-of-the-art stainless steel
  • Hygienic – due to the reduction of grooves and edges
  • Reliable – the best KaVo quality and 2 years warranty
  • Covering all bases – 14 different drill heads for all indications

 

 

 

INTRA LUX heads Dental handpieces and contra-angles

Configurator for dental instruments

Do you know the new instruments-configurator?

No, then test it right here...

INTRA LUX heads Dental handpieces and contra-angles

KaVo INTRA heads – limitless versatility

  • Limitless versatility – KaVo INTRA heads are available for virtually all indications: for classical restorations, prophylaxis, endodontics, surgery and much more
  • Highly flexible – KaVo INTRA heads fit all KaVo MASTERmatic and older LN/LH/CN/CH shanks. Thanks to the KaVo quick-action safety retention collar, the heads can be simply and quickly removed from the shank and exchanged.
  • Highly ergonomic – the particularly small heads offer an optimum view of the workspace
  • Simply safe – all heads can be sterilised at up to 135 °C and heat-disinfected
  • Maximum efficiency – in daily use, the KaVo INTRA LUX heads are time-saving, durable, flexible, and economical. Thus, no unnecessary investments for inflexible complete instruments are required. After several years of use, the head should be replaced whereas the contra-angle handpiece can still be used. Do you need a new dental instrument for a new application? No problem – again, all you have to do is to invest in a new head

 

 

INTRA LUX heads Dental handpieces and contra-angles

KaVo MASTERmatic – 14 exchangeable heads for unlimited versatility

Invest in just a single contra-angle handpiece reducing shank. Our broad range of INTRA heads offers you a comprehensive set of options for all applications.

The overview shows the recommended combination of KaVo MASTERmatic shanks and INTRA heads as well as the resulting operating speed.

Unless specified otherwise, these combinations ensure that the maximum drive speeds of the heads are not exceeded.

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L68

  • Transmission ratio 1:1
  • For contra-angle burs
  • With push-button tensioning, debris deflector disc, and reinforced chuck system
  • Removal of carious material;
    preparation of the cavity floor
  • Max. operating speed 40,000 RPM
  • Mat. no. 1.008.1833

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L67

  • Reduction ratio 2:1
  • For contra-angle burs
  • With pushbutton tensioning, debris deflector disc and reinforced chuck system
  • Increased low-down pull compared to L68
  • Removal of carious material; preparation of the cavity floor
  • Max. operating speed 20,000 RPM
  • Mat. no. 1.008.1832

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA mini head L52

  • Transmission ratio 1:1
  • Ideal for miniature contra-angle bur (16 mm)
  • With push-button chuck
  • For the best viewing conditions when removing carious material, ideal for treatment in confined spaces or pediatric treatment
  • Max. operating speed 40,000 RPM
  • Mat. no. 1.008.1825

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L80

  • Transmission ratio 1:1
  • For turbine drills with 1.6 mm diameter
  • With pushbutton chuck
  • Finishing and forming chewing surfaces after hardening of the filling material; large and effective pre-polishing; also ideal for caries excavation with FG hard metal drills
  • Max. speed 40,000 RPM
  • Mat. no. 1.004.4456

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L68 B

  • Transmission ratio 1:1
  • For contra-angle burs and root canal instruments
  • Ball-bearing mounted push-button chuck
  • Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
  • Ideal for endodontic uses in conjunction with KaVo GENTLEpower 20 LP and KaVo ESTETICA E80/E70/E50 featuring the endodontics function
  • Operating speed 100 - 40,000 rpm
  • Mat. no. 1.008.1834

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L66 B

  • Reduction ratio 3:1
  • For contra-angle burs and root canal instruments
  • Ball-bearing mounted push-button chuck
  • Removing carious material; preparation of the cavity floor; rotating preparation of root canals, e.g. with NiTi files
  • Ideal for endodontic uses in conjunction with KaVo GENTLEpower 20 LP and ESTETICA E80/E70/E50 featuring the endodontics function
  • Operating speed 35 – 13,300 rpm
  • Mat. no. 1.008.1831

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

INTRA LUX heads Dental handpieces and contra-angles

INTRA head L62

  • Reduction ratio 10:1
  • With push-button chuck for handpiece instruments
  • Preparation of root canals with NiTi files, fill root canals with Lentulo, condense root canal materials, gently insert root posts
  • Maximum drive speed 20,000 rpm; operating speed 10 - 2,000 rpm
  • Mat. no. 1.008.1830

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA endo head L3

  • For root canal handpieces with a gripping diameter of 3.5 mm to 4 mm
  • Alternating rotating movement of 60° to avoid fracture
  • With push-button chuck
  • Preparation of root canals
  • Maximum operating speed 3,000 RPM – Recommended shank: 29 LP / 2x green
  • Mat. no. 1.008.1822

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA endo head L3 Y

  • For root canal instruments with a grip diameter of 3.5 mm to 4 mm
  • Up and down stroke of 0.4 mm
  • Force-absorbing adjustment to the torsional force resistance thanks to the radial, free rotatability of 360°
  • With push-button chuck
  • Preparation of root canals, lift motion ideal for use with Hedström files
  • Maximum operating speed 3,000 RPM – Recommended shank: 29 LP / 2x green
  • Mat. no. 1.008.1823

 

INTRA LUX heads Dental handpieces and contra-angles

INTRA endo head L53

  • For root canal instruments with 2.35 mm shaft diameter.
  • Alternating rotating movement of 60° to prevent fracture
  • With push-button chuck
  • Preparation of root canals
  • Maximum operating speed 3,000 RPM – Recommended shank: 29 LP / 2x green
  • Mat. no. 1.008.1826

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

INTRA LUX heads Dental handpieces and contra-angles

INTRA EVA head L61 R

  • Precise locking of the dental instrument into one of 36 snap-in positions (for use with Proxoshape, MarginShaper, Bevelshape, Cavishape, Rootshape files, as well as Ortho Strips from INTENSIV)
  • Damped 0.8-mm lift, for gentle and efficient treatment and preparation

     

  • Indications:
  • For perfect removal of excess filling material and working restored proximal surfaces (with Proxoshape files)
  • For quick and controlled, unilateral or bilateral interdental exposure, enamel reduction and polishing in orthodontics (stripping) (with Ortho Strips)
  • For bevelling anterior tooth composites, composite slots, inlays and onlays (with Bevelshape files)
  • For finishing borders of veneer preparations (with Bevelshape files)
  • For crown preparations when finishing chamfers and bevelling the shoulder preparation (with Bevelshape files)
  • For removing enamel lamellae and for finishing cavity walls; (with Cavishape files)
  • For controlled substance removal during odontoplasty (with Rootshape files)
  • For removing soft dental plaque and calculus, as well as excess filling material on the root surface (with Rootshape files)
  • For quick and easy bevelling, as well as preparation and finishing of cavity walls using a dental instrument (with MarginShaper)
  • Application with sufficient water spray (min. 50 ml/min.)
  • Maximum drive speed 20,000 rpm
  • Mat. no. 1.008.1829

INTRA LUX heads Dental handpieces and contra-angles

 

INTRA EVA head L61 G

  • Damped 0.8-mm stroke for tissue- preserving and pleasant treatment
  • Files can be rotated freely (Proxoshape, Bevelshape, Cavishape, and Rootshape files made by INTENSIV)
  • Interior cooling possible (especially for subgingival applications)
  • For indications see L61 R (use of ortho-strips with L61 G is restricted, MarginShaper cannot be used)
  • Use with sufficient water spray (min. 50 ml/min.)
  • Maximum drive speed 20,000 rpm
  • Mat. no. 1.008.1828

INTRA LUX heads Dental handpieces and contra-angles

 

INTRA prophy head L31

  • Reduction ratio 2:1
  • With thread and knob for snap-on and screw-type polishing attachments (cups, rubber disks and brushes)
  • With multiple sealing to prevent the penetration of polishing paste and the associated wear as best as possible
  • Remove plaque, polish fillings and smooth the tooth surface, e.g. after powder jet treatment or calculus removal
  • Maximum drive speed 15,000 rpm
  • Mat. no. 1.008.1824

 

INTRA LUX heads Dental handpieces and contra-angles

 

INTRA endo/prophy head L53

  • Now also for polishing attachments with a shaft diameter of 2.35 mm
  • Reciprocating rotary motion of 60° prevents the polishing paste from being scattered
  • With push-button chuck
  • Remove plaque, polish fillings and smooth the tooth surface, e.g. after powder jet treatment or calculus removal
  • Maximum operating speed 3,000 rpm – recommended shank: 29 LP / 2x green

KaVo INTRA head - The only configurable contra-angle handpieces composed of INTRA head and Straight & contra-angles dental handpieces. Versatile, economical, unique.

INTRA LUX heads Dental handpieces and contra-angles

INTRA micro head L22

  • Transmission ratio 1:1
  • With round drill size 2
  • Also fits KaVo round drill size 0 or U-inverted cone burs Size 2 and 0
  • Microhead with extremely small dimensions for microsurgical procedures such as apicectomies (through bone window)
  • Maximum operating speed 20,000 rpm
  • Mat. no. 1.008.1835

Downloads

Type

Language

Sort by

Elements per page

Displaying 1 - 10 of 301
INTRA Heads
Document Type: Product Brochure
Language: Italian
Release date: 
Thursday, 10 December, 2015 - 07:12
File size: 
1.15 mb
INTRA Heads
Document Type: Product Brochure
Language: French
Release date: 
Thursday, 10 December, 2015 - 07:12
File size: 
1.18 mb
INTRA Heads
Document Type: Product Brochure
Language: Spanish
Release date: 
Thursday, 10 December, 2015 - 07:12
File size: 
1.20 mb
INTRA Heads
Document Type: Product Brochure
Language: French
Release date: 
Wednesday, 11 March, 2015 - 06:03
File size: 
0.97 mb
INTRA Heads Overview
Document Type: Product Brochure
Language: Spanish
Release date: 
Wednesday, 11 March, 2015 - 06:03
File size: 
0.98 mb
INTRA Köpfe Übersicht
Document Type: Product Brochure
Language: English (UK)
Release date: 
Wednesday, 11 March, 2015 - 06:03
File size: 
1.09 mb
The KaVo Advantage Collections Brochure
Document Type: Product Brochure
Language: English (US)
Release date: 
Thursday, 17 August, 2017 - 07:08
File size: 
20.68 mb
Instrumentenportfolio
Document Type: Product Brochure
Language: German
Version: 
01
Release date: 
Wednesday, 22 April, 2015 - 07:04
File size: 
5.49 mb
INTRA L80
Document Type: Instructions for Use (IFU)
Language: Chinese (China)
Version: 
01
Release date: 
Monday, 1 December, 2014 - 07:12
File size: 
2.04 mb
INTRA EVA L61G-L61R
Document Type: Instructions for Use (IFU)
Language: Chinese (China)
Version: 
01
Release date: 
Tuesday, 2 December, 2014 - 07:12
File size: 
2.09 mb