Micromotors & motor control

Motors & Couplings

Electric and air powered micromotors

Electric powered and air-driven motors from KaVo provide constant-torque over the entire speed range. With the new KaVo SMARTdrive you immediately obtain more comfort and more power as standard and at no extra cost.

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

INTRA LUX KL703 LED

Impressive power and handling – KaVo INTRA LUX KL703 LED. Thanks to a weight reduction of 30 % and a 25 % smaller design, it offers perfect ergonomics and optimum balance with perfect weight distribution.

  • Integrated brushless micromotor with endo function
  • 25 % shorter and 30 % less weight than the INTRA LUX KL702
  • Integrated 25,000 LUX LED with a long service life
  • Speed range
  • 100 - 40,000 rpm in combination with the SMARTdrive motor control
  • 2,000 - 40,000 rpm with normal motor control
  • SMARTdrive optimised
  • Controllable torque
  • Sterilisable
  • Pre-setting and control through control panel of the dentist element
  • Precise control through foot control
  • Indication-based torque setting
  • No independent endo motor needed

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

INTRA LUX KL701 - micromotor

  • 3 year guarantee
  • Micromotor - 8.4 mm shorter than its predecessor
  • Brushless and therefore hardwearing
  • Up to 40,000 revolutions per minute
  • KaVo suck-back stop to prevent sucking back of contaminated spray water
  • Better handling through elastically rotatable tubing
  • Lighter than 100 grams
  • Very quiet thanks to minimum cooling air requirement
  • Replaceable ball bearings
  • Patented winding

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller
K200 (successor to K196)

INTRAmatic LUX K200

  • 2 year warranty
  • One of the smallest and most reliable motors on the dental market
  • Up to 40,000 revolutions per minute
  • Integrated non-return valve:
    Prevents recontamination of the spray water system with
    micro-organisms
  • Flexible, elastic and easily rotatable. The newly developed tubing maximizes the handling and facilitates your work.
  • New lubricant filter: The special protective barrier against contamination. All cleaning and care agents are trapped so that they do not reach the inside of the motor.
  • Increased life cycle
  • Mat.-Nr. K200: 1.000.6717

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

INTRAmatic L LUX Motor 181 L

  • Speed range: 5,000 - 20,000 rpm
  • 4-hole LUX connection
  • INTRAmatic coolart system
  • Mat.-Nr. 0.535.5210

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

INTRAmatic L-Motor 181 H

  • Speed range: 5,000 - 20,000 rpm
  • 4-hole standard connection
  • INTRAmatic 2 coolart system
  • Mat.-Nr. 0.535.5200

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

INTRA MULTIflex L-Motor 181 M

  • Speed range: 5,000 - 20,000 rpm
  • For connection to MULTIflex couplings
  • INTRAmatic 2 coolart system
  • Mat.-Nr. 0.535.5250

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

Surgery motor INTRA LUX S600 LED

  • 28 % lighter and 20 % shorter*
  • 80 Ncm torque at the instrument
  • SMARTdrive technology for high torque and minimum vibration at the start
  • Max torque 5.5 Ncm (0 -12,000 U / min) / 5.5 to 2.5 Ncm between 12,000 - 40,000 rpm
  • Speed range: 0 – 40,000 rpm
  • Brushless DC motor with KaVo Mini LED
  • Thermodisinfectable and sterilizable
  • Mat.-Nr. 1.008.8000

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

Surgery motor INTRA-LUX SL 550

  • Motor control: INTRAsurg 300 plus, INTRAsurg 1000, INTRAsurg 1000 Air, treatment unit with electronic
  • Speed range: min. 300 rpm / max. 40,000 rpm
  • Torque control: max. 5.5 Ncm
  • Light: 25,000 Lux
  • Mat.-Nr. 1.001.3421

Thanks to the pilot drive, the torque is much higher even in the low speed range.

Take the touch test

Experience the SmartDrive INFORM TECHNOLOGY WHICH generation in motor control :

  • Increased torque

  • Improved startup characteristics

  • Wider speed range

  • Extended area of application

More comfort and power

With the new KaVo SMARTdrive you immediately obtain more comfort and more power as standard and at no extra cost.
With the KaVo Treatment Centres, ESTETICA E80, E70, E50, E30 and PRIMUS 1058, the new generation of motor control, KaVo SMARTdrive, now comes as standard.

KaVo offers you a real innovation that you will appreciate.

 

 Micromotors & motor control Couplers, Motors & Electric Motor Controller

High torque for all dental procedures

Thanks to the new pilot drive, the torque is much higher even in the low speed range. This supports safe and precise operation, which in turn reduces treatment times.

 

Vibration-free, smooth startup characteristics

KaVo SMARTdrive offers especially vibration-free startup characteristics in the low speed range from as little as only 100 revolutions per minute.
This enables especially quiet, controlled running for steadier and more efficient work.

Motor characteristic Standard: perceptible and audible jerking
SMARTdrive INFORM TECHNOLOGY: Vibration-free, smooth startup characteristics

A wide range of speeds increases the area of application for the dentist

KaVo SMARTdrive now offers you a wider speed range – this extends from just 100 to 40,000 revolutions per minute, compared with the previous 2,000 to 40,000 revolutions per minute. In general, all straight and contra-angle handpieces are more versatile, due to the wider speed range, which results in an extension of the area of application per handpiece.

Experience just how gentle power can be. Take the touch test.

Documentation

Document types

Language

Sort by

Elements per page

Displaying 1 - 10 of 17
INTRA L-LUX 181 L
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
05
Release date: 
Tuesday, 13 February, 2018 - 06:02
File size: 
3.13 mb
INTRA L-LUX 181 L
Document Type: Instructions for Use (IFU)
Version: 
05
Release date: 
Thursday, 5 July, 2018 - 06:07
File size: 
0.77 mb
INTRA-L-MOTOR 181 H
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
07
Release date: 
Monday, 29 January, 2018 - 06:01
File size: 
2.79 mb
INTRAmatic 181 CB
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
03
Release date: 
Tuesday, 17 June, 2014 - 06:06
File size: 
2.51 mb
INTRAmatic 181 M
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
08
Release date: 
Friday, 26 January, 2018 - 06:01
File size: 
3.28 mb
INTRAmatic L-Motor 181 CB
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
03
Release date: 
Tuesday, 17 June, 2014 - 06:06
File size: 
2.51 mb
INTRAmatic L-Motor 181 H
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
06
Release date: 
Monday, 16 June, 2014 - 06:06
File size: 
2.51 mb
INTRAmatic L-Motor 181 L
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
04
Release date: 
Monday, 16 June, 2014 - 06:06
File size: 
2.47 mb
INTRAmatic L-Motor 181 M
Document Type: Instructions for Use (IFU)
Language: English (UK)
Version: 
07
Release date: 
Tuesday, 17 June, 2014 - 06:06
File size: 
2.49 mb
INTRA L-Motore 181 L / H / CB/ M / K
Document Type: Conformity Statements
Language: Czech, English (UK), FrenchView More, German, Hungarian, Italian, Spanish
Version: 
01
Release date: 
Friday, 2 October, 2015 - 06:10
File size: 
0.45 mb