DSEclinical™ 5197

Unità di simulazione dentale

Simulation unit for a real simulation

The dental simulation unit KaVo DSEclinical 5197 stands for excellent ergonomics, design and a maximum of flexibility.

DSEclinical 5197 Dental Simulation Units

Train your students on simulation units to give them the best possible preparation for working under actual clinical conditions.

  • The numerous positions of the patients simulator ensure the proper ergonomics during treatment, and simultaneously save space.

  • Flexibility in terms of equipment and possible combinations facilitates tailoring to your specific requirements and the spatial conditions inside your surgery.

  • Simple, creative and competent.

  • Experience simulation with realistic adjustment settings as they would be on the dental treatment equipment used under actual clinical conditions.

DSEclinical 5197 Dental Simulation Units

Dentist element

The dentist element of the KaVo Primus 1058 may be composed individually and thus fulfills the highest requirements. Five instrument trays may be freely configured. In addition, the extension module allows for the connection of an intraoral camera, for example. Changes may also be made at a later point in time, guaranteeing future flexibility. The dentist element is available both as a TM Table and S Table.

 

DSEclinical 5197 Dental Simulation Units

Assistant element

The standard assistant element offers space for high volume aspirator, saliva ejector aspirator and, as an option, for the col-md-6 three-function hand-piece as well as LED polymerisation handpiece. Likewise available as an option is the height adjustment for optimal treatment ergonomics (adjustment range: 30 cm). The optional film keypad with one-touch keys constitutes an enhancement of operational comfort for the assistant. This facilitates the control of the following functions: instrument light, treatment light On/Off, switch the motor direction, spray pre-selection and position setting.

 

 

Flexibility for individual solutions

 

DSEclinical 5197 Dental Simulation Units

Patient simulator

The vertical position of the patient simulator can be adjusted by pressing the chip blower of the foot switch and moving the simulator to the proper height.

  • Min. height up to the incisal edge: 680 mm
  • Max. height up to the incisal edge: 1000 mm

 

 

DSEclinical 5197 Dental Simulation Units

Foot control

The comfortable foot control has a centering function. The ergonomic, right-left swing of the pivot pedal, prevents leg muscles from becoming tired. The foot control facilitates the control of all chair, instrument and multimedia functions

 

 

DSEclinical 5197 Dental Simulation Units

Right-left adjustment

The simulation unit KaVo DSEclinical may be converted from right
hand use to left hand use in just a few col-md-6s and without the
requirement to use any tools.

 

 

DSEclinical 5197 Dental Simulation Units

KaVo DSEclinical with a swivel table

The KaVo DSEclinical 5197 may also be fitted with a swivel table. The swivel table allows for a more ergonomic sitting posture. The well balanced instruments facilitate fatigue-free operation, while collisions are avoided by moving the table out of the way. 5 instrument holders allow a variable instrument configuration.

 

 

DSEclinical 5197 Dental Simulation Units

Double chair

Remarkable characteristics of the KaVo DSEclinical 5197 are its high degree of flexibility regarding its equipment and its versatile combination possibilities. This allows for the KaVo DSEclinical to be adjusted to any individual circumstances regarding the availability of space in your clinic. An example of the most commonly installed version of the double-chair version is displayed.

 

 

DSEclinical 5197 Dental Simulation Units

KaVo DSEclinical with Dentsim integration

As an option, the KaVo DSEclinical 5197 offers the integration of the Dentsim system from Image Navigation. With this computer controlled learning and simulation system, pre-clinic students may practice dental treatment workflows:

  • Precise tactile feedback during the preparation of KaVo simulation teeth.
  • Training of various dental treatment procedures with live 3D display and navigation.
  • Independent learning.
  • Visual traceability of the student’s performance.
  • Automatic analysis of the student’s preparations.

 

 

DSEclinical 5197 Dental Simulation Units

Combination workplace

The KaVo DSEclinical combination workplace combines a simulation unit with a complete KaVo Primus 1058 treatment unit. If required, both units
may be used as simulation units by installing the patient simulator on the patient chair of the KaVo Primus 1058. For the mutual training of treatment situations, one student may play the role of the patient and be treated by the other student on
the treatment unit.

 

Rated voltage (country-specific)

  • 100 V / 50/60 Hz
  • 120 V / 50/60 Hz
  • 230 V / 50/60 Hz

Services

  • Water quality drinking water
  • Water hardness 1.5 to 2.14 mmol/l _ 8.4° to 12° dH
  • pH-value 7.2 to 7.8

 

Mains fuse

  • Typ T6,3 H / 250 V
  • Maximum permissible mains voltage fluctuations ±10 % of the mains voltage
  • Overload category II

Speed

  • Dental drives
  • Instruments depending on the type up to 300,000 min-1
  • KL motor 40,000 min-1

 

Operating mode

  • Intermittent operation for motor KL 701, the operation time consists of 2 minutes, the time out consists of 8 minutes
  • Intermittent operation for the motor KL 703, the operation time consists of 2 minutes, the time out consists of 8 minutes
  • The operation time consists of 25 col-md-6s, the time out consists of 400 col-md-6s

Connected loads

  • Power consumption about 450 VA in the basic equipment version
  • Water pressure ranging from 2 to 6 bar
  • Air pressure ranging from 5 to 7 bar
  • Maximum water consumption 0.1 l/min
  • Maximum air consumption with external suction 60 l/min

 

 

Overview of the Equipment

 

Patient chair

standard_kl_9

Default

standard_kl_9

   
 Backrest

standard_kl_9

Comfort

standard_kl_9

   
 Headrest

standard_kl_9

Double joint with a rotary knob

standard_kl_9

   
Dentist element

standard_kl_9

TM table

muss_kl

Swivel table

muss_kl

1. Turbine tubing

/sites/default/files/optional_kl

1. KL motor connection for KL 701

/sites/default/files/optional_kl

1. KL motor connection for KL 703

/sites/default/files/optional_kl

triple function handpiece

standard_kl_9

Multifunctional handpiece

/sites/default/files/optional_kl

2. Turbine tubing

/sites/default/files/optional_kl

2. KL motor connection for KL 701

/sites/default/files/optional_kl

2. KL motor connection for KL 703

/sites/default/files/optional_kl

PIEZOlux Ultrasonic scaler kit

/sites/default/files/optional_kl

PIEZOsoft Ultrasonic Scaler

/sites/default/files/optional_kl

Tray holder for US tray

/sites/default/files/optional_kl

Tray 1 standard tray

/sites/default/files/optional_kl

Tray 2 standard trays

/sites/default/files/optional_kl

2 standard trays / instrument rack

/sites/default/files/optional_kl

Non-slip mat

/sites/default/files/optional_kl

Anti-reflux valve for handpieces

standard_kl_9

ERGOcam

/sites/default/files/optional_kl

   
Assistant element

standard_kl_9

High volume aspirator

standard_kl_9

Saliva ejector

standard_kl_9

triple function handpiece

/sites/default/files/optional_kl

Multifunctional handpiece

/sites/default/files/optional_kl

Satelec LED curing light

/sites/default/files/optional_kl

Tray for accommodating a tray

/sites/default/files/optional_kl

Tray for DIAGNOdent

/sites/default/files/optional_kl

Swivelling assistant’s element

standard_kl_9

Swivel and height-adjustable assistant element

/sites/default/files/optional_kl

Selective support kit

/sites/default/files/optional_kl

   
Supply system 

standard_kl_9

Water block, compact

standard_kl_9

   
Disposal system

standard_kl_9

External suction

standard_kl_9

Solids collector kit

standard_kl_9

   
Other utilities

standard_kl_9

Foot control

standard_kl_9

KaVoLUX 540 LED

/sites/default/files/optional_kl

KaVo MAIA LED

/sites/default/files/optional_kl

KaVo EDI

/sites/default/files/optional_kl

Light mounting post

/sites/default/files/optional_kl

ERGOcom light

/sites/default/files/optional_kl

Dentsim Integration*

/sites/default/files/optional_kl

 

  Legende

standard_kl_9

Standard equipment

/sites/default/files/optional_kl

Optional equipment

muss_kl

Must be chosen

*

Only possible in the dentist element TM Table

Video

Mahidol DentSim First Classroom June 10, 2013 MVI 3390
Visit the website for more details: http:www.dentsimlab.com

Documentazione

Document types

Lingua

Ordina per

Elements per page

Visualizzazione 1 - 5 di 5
DSE clinical 5197
Tipo Documento: Instruzioni per l'uso
Lingua: Italiano
Version: 
07
Release date: 
Venerdì, 13 Dicembre, 2013 - 07:12
File size: 
9.93 mb
DSE clinical 5197
Tipo Documento: Instruzioni per l'uso
Lingua: Italiano
Version: 
06
Release date: 
Lunedì, 25 Febbraio, 2013 - 07:02
File size: 
10.92 mb
DSE clinical 5197
Tipo Documento: Instruzioni per l'uso
Lingua: Italiano
Version: 
04
Release date: 
Lunedì, 5 Ottobre, 2009 - 07:10
File size: 
4.60 mb
DSE clinical 5197
Tipo Documento: Instruzioni per l'uso
Lingua: Italiano
Version: 
03
Release date: 
Venerdì, 6 Febbraio, 2009 - 07:02
File size: 
0.89 mb
DSE clinical 5197
Tipo Documento: Dichiarazione di conformità
Lingua: Tedesco, English (UK), FranceseView More, Italiano, Spagnolo, Bulgaro, Ceco, Danese, Greco, Estone, Finnico, Croato, Ungherese, Lituano, Lettone, Olandese, Norwegian, Polacco, Portuguese (Portugal), Rumeno, Svedese, Svedese, Turco
Version: 
00
Release date: 
Venerdì, 17 Ottobre, 2008 - 07:10
File size: 
1.18 mb